New Items

• NEMA34 , 2 Phase Stepper motors

• Frame Size : 86 mm

• Stepping angle : 1.8 Degree

• Holding Torque : 85 Kgcm

• High Precision

• Smooth movement

• Low motor Heating

• Low movement Noise

• Bipolar Hybrid Stepping motors

• Parallel / Series / Unipolar connections

 

• Item Code: 86AM85-14
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

Janatics FRL Filter
FRCLM1 series - Sizes : G1/4, G3/8, G1/2, G3/4, G1

• Modular type for easy and fast maintenance
• Suitable for wall mounting
• Filter
  • Bronze filtering element
  • Separator and shield for efficient moisture separation
  • Press type manual drain for easy operation
• Regulator
  • Diaphragm operated, relieving type
  • Pressure compensated by Balanced poppet
  • Flow compensated in models FRCLM14, FRCLM15 and FRCLM17 for faster response
  • Non raising Press to Lock adjusting knob for locking at any set pressure
• Lubricator
  • Fog/Mist type Lubricator
  • Fine adjustment of lubrication
  • Lubrication proportional to flow
• Steel bowl guard, bayonet type on FRCLM14, FRCLM15 and FRCLM17 models and threaded type on FRLM13 model
• Good flow and regulating characteristics

LMK Linear Bearing

Linear Bearing LMK It is suitable for Shaft Dia 16,20,25,30,40 mm. Linear Bearings are of High Accuracy. For optimum performance use with Hardened and Ground Shaft. 

 

Features :

High Precision and Rigidity linear motion bearings are produced from a solid steel outer cylinder. Also the linear motion bearing incorporates an industrial strength resin retainer 

Ease of Assembly The standard type of linear motion bearing can be loaded from any direction.

Ease of Replacement Linear Motion bearing of each type are completely interchangeable with other brands because of their standardised dimensions and strict precision control. Replacement because of wear or damage is therefore easy and accurate.

 

Construction :

• Linear motion bearing consists of an outer cylinder, ball retainer, balls and two end rings. The ball retainer which holds the balls in the recirculating trucks in held inside the outer cylinder by end rings.
• Those parts are assembled to optimise their required functions.
• The outer cylinder is maintained sufficient harness by heat treatment, therefore it ensures the bushings projected travel life and satisfactory durability．
• The ball retainer is made from resin.
• Linear Bearings has has wiper seals on Both Sides which prevents dust from going in and retains the oil inside.

• Item Code: LMK16UU
• Production Capacity: 10000
• Delivery Time: As per stock
• Packaging Details: Standard

Baumer make pressure Guage
Model: AA.C13.2BM.0/10kg/Cm2
Range 0 to 10 kg/cm2
Pressure Guage PAnel mount

• Item Code: 0-10bar
• Production Capacity: 500
• Delivery Time: As per stock
• Packaging Details: Standard

EMI Filters, or electromagnetic interference filters, also called RFI Filters or radio-frequency interference filters, are an electrical device / circuit that mitigate the high frequency Electromagnetic noise present on the power and signal lines. The high frequency noise is generated by a variety of electrical and electronic devices such as motors, electronic controls, power supplies, inverters, clock circuits, microprocessors, appliances, electronic devices etc. This noise is typically in the 9KHz to 10GHz frequency range and it can degrade or prevent the signal transmissions and/or the intended performance of an electrical/electronic equipment. The lower frequency components of the EM noise can impact the power quality as well.

Get Best Price Of The DC Rfi Emi Filter For Rs.850/-

• Item Code: EF-1B015B01E-C02
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

LINEAR MOTION GUIDE

The Linear Guide way is a design of rolling motion with a low friction coefficient, and the difference between dynamic and static friction is very small. Therefore, the stick-slip will not occur when sub micron feeding is done.

FEATURES:-

• Kunix KXB- Series linear guide
• Accuracy: Grade 1,2,3,4,5 or C/H/P/SP/UP
• Performance: antifriction, interchangeable
• Ensure for high accuracies
• Application: CNC or automatic machinery
• Accuracy grade

• Item Code: KGH20
• Production Capacity: 500
• Delivery Time: As per stock
• Packaging Details: Standard

The HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial and lateral directions, and self-aligning to absorb installation-error. Thus, the HG series linear guideways can achieve a long life with high speed, high accuracy and smooth linear motion.

• Item Code: HGW20C
• Production Capacity: 500
• Delivery Time: As per stock
• Packaging Details: Standard

l Anti-Resonance provides optimal torque and nulls mid-range instability l Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors l Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement l 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 l Soft-start with no “jump” when powered on l Input voltage 18-50VDC l 8 selectable peak current including 4.20A l Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input l Automatic idle-current reduction l Suitable for 2-phase and 4-phase motors l Support PUL/DIR and CW/CCW modes l Over-voltage, over-current protections 

• Item Code: SEA5045
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

A limit switch is an electromechanical device operated by a physical force applied to it by an object.

Limit switches are used to detect the presence or absence of an object.

These switches were originally used to define the limit of travel of an object, and as a result, they were named Limit Switch.

• Item Code: SC-8108
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

Baumer make pressure Guage
Model: AA.D.12.2BM.0/10 kg/cm2
Panel Mount pressure guage
for 0-10 bar prssure

• Item Code: Baumer
• Production Capacity: 500
• Delivery Time: As per stock
• Packaging Details: Standard

D Scall Water Conditioner, No Maintenance, No Water Wastage, No Chemicals, No AMC & Life time Warranty

Raytools Laser cutting nozzles 
Double
Available 1.0, 1.2, 1.5mm
We do provide all Original spares of Raytools Brand

• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: standard

“Proximity Sensor” includes all sensors that perform non-contact detection in comparison to sensors, such as limit switches, that detect objects by physically contacting them. Proximity Sensors convert information on the movement or presence of an object into an electrical signal. Proximity Sensors detect an object without touching it, and they therefore do not cause abrasion or damage to the object.

• Item Code: Proximity
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

• Perfectly fit on the extruder
• Noiseless Performance
• Very low Current consumption
• Operating Voltage : 220/240 VAC
• Type : AC
• Operating Current : 0.18Amp±10%
• Rated speed : 1500 - 3500 RPM
• Air Flow : 43CFM
• Noise : 22dBA
• Length : 120mm
• Width :  120mm
• Height : 38mm
• Weight : 250gm

• Item Code: FM12038A2HSL
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

• Linear motion bearing consists of an outer cylinder, ball retainer, balls and two end rings. The ball retainer which holds the balls in the recirculating trucks in held inside the outer cylinder by end rings.
• Those parts are assembled to optimise their required functions.
• The outer cylinder is maintained sufficient harness by heat treatment, therefore it ensures the bushings projected travel life and satisfactory durability．
• The ball retainer is made from resin.
• Linear Bearings has has wiper seals on Both Sides which prevents dust from going in and retains the oil inside.

• Item Code: LMU16
• Production Capacity: 10000
• Delivery Time: As per stock
• Packaging Details: Standard

• Operating Voltage : 220-240V
• Type : AC
• Operating Current : 0.1Amp±10%
• Rated speed : 2600RPM
• Air Flow : 43.6CFM
• Noise : 31dBA
• Length : 80mm
• Width :  80mm
• Height : 25mm

• Item Code: Fan3
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

Patcon 230VAC Solenoid Valve, 0-10 bar, 3.0mm Orifice Solenoid Valve for Pneumatic/ Hydraulic transmission.
Type: FL

• Item Code: PC22CD
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: standard

Nominal Width 10Thread Type BSPPort Size 3/8Regulating Pressure Range 0.5 - 10 barNRV Without Non return valveTamper Proof Without Tamper proofFlow Rate In LPM 2500Working Pressure Range 15 BarStandard ISO 6953-1Temperature 5 ° C to 60 ° C

• Item Code: R14624
• Production Capacity: 1000
• Delivery Time: As per stock
• Packaging Details: Standard

IO Card module is specially design for CNC Flame & Plasma cutting function controls through relay based modules. Easy to use and less wirings.

• Item Code: SHE-IO
• Production Capacity: 500
• Delivery Time: As per stock
• Packaging Details: Standard