Minimum Order Quantity | 1 Number |
Voltage | 480/600 V |
Brand | Hypertherm |
Model Name/Number | Powermax 125 |
Phase | 3 Phase |
Frequency | 50/60 Hz |
Output Power | 21.9 kW |
Input Current | 31/24 A |
Output Current | 30-125 A |
Rated Output Voltage | 175V DC |
Duty Cycle | 100% |
Open Circuit Voltage | 320V DC |
Dimensions | 23.3 x 10.8 x 20 inch (D x W x H) with handles |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Cutting Gas Inlet Flow Rate | 260 l/min (550 scfh) at 5.9 bar (85 psi) |
Gouging Gas Inlet Flow Rate | 212 l/min (450 scfh) at 4.1 bar (60 psi) |
Input Power Cable Length | 10 feet |
Power Supply Type | Inverter - IGBT |
Engine Drive Requirement | 40 kW for full 125 A output |
Power Supply Warranty | 3 Years |
Torch Warranty | 1 Year |
Other Details:
Professional-grade plasma metal cutting and gouging system for handheld cutting 1-1/2" and mechanized piercing 1".
Standard Torch Styles:
85° hand torch
15° hand torch
180° mini machine torch
180° full-length machine torch
Maximum Productivity:
Finish jobs faster with cut speeds 5 times greater than oxyfuel on 1/2" mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Maximize your cutting time with 100% duty cycle.
Low operating costs:
Reduce costs with consumable life up to four times longer than other systems in this amperage range.
Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
Easy-to-use for cutting and gouging:
No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
Tackle different jobs with multiple, easy-to-use torch styles.
Built and tested to withstand the harshest conditions:
Duramax Hyamp torches are designed for high-impact and heat resistance.
SpringStart technology ensures consistent starting and a more reliable torch.
Low maintenance maximizes uptime.
Weight w/25' torch:
480 V 105.7 lbs
600 V 104.7 lbs
Minimum Order Quantity | 1 Number |
Brand | Hypertherm |
Model Name/Number | Powermax 45 XP |
Input Voltage | 200-240 V, 1-Ph, 50-60 Hz |
Output Current | 10-45 A |
Rated Output Voltage | 145V DC |
Phase | Single Phase |
Frequency | 50-60 Hz |
Open Circuit Voltage | 275V DC |
Dimensions | 17.4 x 6.8 x 14.1 inch (D x W x H) with handles |
Cutting Gas Supply | Air (clean, dry and oil-free), nitrogen, F5 |
Gouging Gas Supply | Air (clean, dry and oil-free), nitrogen, F5 |
Marking Gas Supply | Air (clean, dry and oil-free), argon |
Recommended Gas Inlet Flow Rate | 400 scfh at 85 psi |
Input Power Cable Length | 10 feet |
Power Supply Type | Inverter - IGBT |
Engine Drive Requirement | 12.5 kVA |
Electrical Efficiency | 88% |
Recyclability | 100% |
Power Supply Warranty | 3 Years |
Torch Warranty | 1 Year |
Other Details:
Professional-grade plasma system for cutting 5/8" thick metal, gouging, and marking.
Standard Torch Styles:
Duramax Lock 75° hand torch
Duramax Lock 15° hand torch
Duramax Lock machine torch
Easy-to-use with versatile design:
Small size and light weight provides exceptional portability for a 5/8" rated cutting system.
Handheld and mechanized usage with CNC interface and FastConnect torch connection.
Patented drag-cutting technology makes it easy to use – even for first-time operators.
Tackle different jobs with multiple, easy-to-use torch and consumable styles.
No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
Mark, score and make precision gouges with new low amp process.
Maximum Productivity:
Finish jobs faster with cut speeds one and a half times greater than oxyfuel on 1/4" mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Fast change out of consumables using the new torch disable switch feature.
Rugged and reliable:
Duramax Lock torches are designed for high-impact and heat resistance.
SpringStart technology ensures consistent starting and a more reliable torch.
Hypertherm Certified reliability ensures performance in the most demanding environment.
Common Applications:
Property/plant maintenance, fire and rescue, general fabrication
HVAC and Mechanical contracting
Educational institutions
Agricultural and farm equipment maintenance
Duty Class:
50% @ 45 A, 200–240 V, 1-Ph
60% @ 41 A, 200–240 V, 1-Ph
100% @ 32 A, 200–240 V, 1-Ph
50% @ 45 A, 480 V, 3-Ph
60% @ 41 A, 480 V, 3-Ph
100% @ 32 A, 480 V, 3-Ph
Input Current:
200–240 V, 1-Ph: 39/32 A
480 V, 3-PH: 9.4 A
Other Input Voltage:
480 V, 3-Ph, 50–60 Hz
Minimum Order Quantity | 1 Number |
Brand | Hypertherm |
Model Name/Number | Powermax 65 |
Weight | 64 lbs (w/25' torch) |
Input Voltage | 200-480 V |
Phase | Single Phase |
Frequency | 50/60 Hz |
Output Power | 11 kW |
Output Current | 20-65 A |
Rated Output Voltage | 139V DC |
Open Circuit Voltage | 295V DC |
Dimensions | 19.7 x 9.2 x 17.9 inch (D x W x H) with handles |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Cutting Gas Inlet Flow Rate | 400 scfh, 6.7 scfm at 85 psi |
Gouging Gas Inlet Flow Rate | 450 scfh, 7.5 scfm at 70 psi |
Input Power Cable Length | 10 feet |
Power Supply Type | Inverter - IGBT |
Engine Drive Requirement | 15 kW for full 65 A output |
Power Supply Warranty | 3 Years |
Torch Warranty | 1 Year |
Other Details:
Professional-grade plasma metal cutting and gouging system for handheld cutting 3/4" and mechanized piercing 5/8".
Standard Torch Styles:
75° hand torch
15° hand torch
180° mini machine torch
180° full-length machine torch
Maximum Productivity:
Finish jobs faster with cut speeds one and a half times greater than oxyfuel on 1/2" mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Easy-to-use for cutting and gouging:
No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting.
Tackle different jobs with multiple, easy-to-use torch styles.
Low operating costs:
Reduce costs with long consumable life and more uptime.
High power efficiency lowers energy consumption.
Built and tested to withstand the harshest conditions:
Duramax torches are designed for high-impact and heat resistance.
SpringStart technology ensures consistent starting and a more reliable torch.
Low maintenance for maximum uptime.
Duty Cycle Available:
50% @ 65 A, 230–600 V, 1/3-Ph
40% @ 65 A, 200–208 V, 1/3-Ph
100% @ 46 A, 230–600 V, 1/3-Ph
Input Current:
200/208/240/480 V, 1-Ph: 52/50/44/22 A
200/208/240/480/600 V, 3-Ph: 32/31/27/13/13 A
Other Input Voltage:
200–600 V, 3-Ph, 50/60 Hz
Minimum Order Quantity | 1 Unit |
Automation Grade | Semi Automatic |
Brand | SH Electronics Co |
Max Cutting Thickness | 25mm |
Gas Supply | Inbuilt Air Pump |
Frequency | 50 Hz |
Voltage | 380V |
Output Current | 120A |
Model Name/Number | CUT-120 Plus |
We are offering CUT-100 Plus Plasma Cutting Machine built in compressor with 400ARC Welding to our clients.
Minimum Order Quantity | 1 Number |
Weight | 100 lbs (w/25' torch) |
Brand | Hypertherm |
Model Name/Number | Powermax 105 |
Input Voltage | 200-600 V |
Phase | 3 Phase |
Frequency | 50/60 Hz |
Output Power | 16.8 kW |
Output Current | 30-105 A |
Rated Output Voltage | 160V DC |
Open Circuit Voltage | 300V DC |
Dimensions | 23.3 x 10.8 x 20 inch (D x W x H) with handles |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Cutting Gas Inlet Flow Rate | 460 scfh, 7.7 scfm at 85 psi |
Gouging Gas Inlet Flow Rate | 480 scfh, 8.0 scfm at 70 psi |
Input Power Cable Length | 10 feet |
Power Supply Type | Inverter - IGBT |
Engine Drive Requirement | 30 kW |
Power Supply Warranty | 3 Years |
Torch Warranty | 1 Year |
Other Details:
Professional-grade plasma metal cutting and gouging system for handheld cutting 1-1/4" and mechanized piercing 7/8".
Torch Styles:
180° full-length machine torch
Maximum Productivity:
Finish jobs faster with cut speeds three times greater than oxyfuel on 1/2" mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Low operating costs:
Reduce costs with long consumable life and more uptime.
Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
Easy-to-use for cutting and gouging:
No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting.
Tackle different jobs with multiple, easy-to-use torch styles.
Built and tested to withstand the harshest conditions:
Duramax torches are designed for high-impact and heat resistance.
SpringStart technology ensures consistent starting and a more reliable torch.
Low maintenance for maximum uptime.
Input Current:
200/208/240/480/600 V, 3-Ph: 58/56/49/25/22 A
Duty Cycle:
70% @ 105 A, 240 V, 3-Ph
80% @ 105 A, 480–600 V, 3-Ph
100% @ 94 A, 480–600 V, 3-Ph
100% @ 88 A, 240 V, 3-Ph
Minimum Order Quantity | 1 Number |
Brand | Hypertherm |
Model Name/Number | Powermax 85 |
Weight | 32 kg (w/25' torch) |
Input Voltage | 200-480 V |
Phase | Single Phase |
Frequency | 50/60 Hz |
Output Power | 12.2 kW |
Output Current | 25-85 A |
Rated Output Voltage | 143V DC |
Open Circuit Voltage | 305V DC |
Dimensions | 19.7 x 9.2 x 17.9 inch (D x W x H) with handles |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Cutting Gas Inlet Flow Rate | 400 scfh at 85 psi |
Gouging Gas Inlet Flow Rate | 450 scfh at 70 psi |
Input Power Cable Length | 10 feet |
Power Supply Type | Inverter - IGBT |
Engine Drive Requirement | 20 kW for full 85 A output |
Power Supply Warranty | 3 Years |
Torch Warranty | 1 Year |
Other Details:
Professional-grade plasma metal cutting and gouging system for handheld cutting 1" and mechanized piercing 3/4".
Standard Torch Styles:
75° hand torch
15° hand torch
180° mini machine torch
180° full-length machine torch
Maximum productivity:
Finish jobs faster with cut speeds two and a half times greater than oxyfuel on 1/2" mild steel.
Spend less time on grinding and edge preparation due to superior cut and gouge quality.
Easy-to-use for cutting and gouging:
No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting.
Tackle different jobs with multiple, easy-to-use torch styles.
Low operating costs:
Reduce costs with long consumable life and more uptime.
High power efficiency lowers energy consumption.
Built and tested to withstand the harshest conditions:
Duramax torches are designed for high-impact and heat resistance.
SpringStart technology ensures consistent starting and a more reliable torch.
Low maintenance for maximum uptime.
Other Input Voltage:
200–600 V, 3-Ph, 50/60 Hz
Input Current:
200/208/240/480 V, 1-Ph: 70/68/58/29 A
200/208/240/480/600 V, 3-Ph: 42/40/35/18/17 A
Duty Cycle:
60% @ 85 A, 230–600 V, 3-Ph
60% @ 85 A, 480 V, 1-Ph
50% @ 85 A 240 V, 1-Ph
50% @ 85 A, 200–208 V, 3-Ph
40% @ 85 A, 200–208 V, 1-Ph
100% @ 66 A, 230–600 V, 1/3-Ph
Minimum Order Quantity | 01 Piece |
Model Name/Number | CUT-160 |
Brand | SHECO |
Max Cutting Thickness | 50mm |
Automation Grade | Fully Automatic |
Usage/Application | Metal Cutting |
Capacity | 50mm |
Gas Supply | Air |
Power Source | Plasma |
Frequency | 50-60 Hz |
CUT-160 Air Plasma Cutter
High Quality Plasma cutter for cutting thickness upto 50mm
Powerful Output
· Heavy duty-160A@100%, at 40 104 the quality cutting capacity is up to 50mm and CNC piercing 25mm;
· High output voltage-200VDC ensures a long plasma arc length;
Specially designed torch
· Refined single-air system Torch-requires higher pressure and arc voltage, which shift the cutting limitation;
Maximum productivity
· Maximum productivity-Finish jobs faster with cut speeds two and three times greater than other traditional cutting process;
· Superior cut performance-Significantly save a lot of time on secondary operations;
Minimum Order Quantity | 1 Piece |
Voltage | Not required |
Usage/Application | Air Plasma |
Fuel Gas Type | Air |
Consumable Type | Electrodes |
Model Name/Number | 428936 |
Torch Type | Hypertherm Plasma |
Hypertherm Powermax SYNC Cartridge part no. 428936 for 105 Amps special design with new life reading feature
Types Of CNC Cutting | Plasma |
Service Mode | Labor Charges |
Service Duration | Depend on Job |
Type Of Cutting | Plasma Cutting |
Design | Services |
Type Of Machine | CNC Plasma Cutting Machine |
We do provide CNC Flame Plasma cutting job work on labor charges basis.
We are manufacturer of CNC profile cutting machines
Minimum Order Quantity | 01 Set |
Usage/Application | CNC Machine |
Material | Stainless Steel |
Max Cutting Width | 0-500 mm |
Fuel Gas Type | LPG |
Torch Type | Plasma Torch |
Max Cutting Speed | 0-500 mm/min, 500-1000 mm/min |
Max Cutting Thickness | 20 mm |
Weight | 45 kg |
Automation Grade | Automatic |
Max Cutting Length | 0-500 mm, 500-1000 mm |
PROCUT-125MAX- The PROCUT-125MAX has the samefeatures as the PROCUT-105MAX. butwith more power from an output currentof 125Amps, Designed to maximizeuptime and productivity for Air plasmacutting.- The cutting capacity can reach 18mm(dross free) for Air/Air gas with CNC cut -ting, maximum productivity.
SpecificationsSystem: PROCUT-125MAXInput Voltages: 380V, 3PH, 50/60Hz 400V, 3PH, 50/60Hz 220V, 3PH, 50/60Hz Max. Load Power Capacity: 20.3KVA Rated output voltage: 175VDCMax output current: 125ADuty cycle rating40°C(105°F): 380V/400V: 100% @125A 3PH 220V: 100% @125A 3PHOperating temperature: -10°C~40°COpen circuit voltage (OCV): 380VDCDimensions: 680*310*650mmWeight: 45KGTorch: TP125, 7.5m
Recommended gas inlet flow rate/pressure: Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh) @ 4.1 bar (60 psi)Gas supply: Clean, dry, oil-free air or nitrogenCertifications: CE,ROHSWarranty: Power supplies have a 3-year warranty
Minimum Order Quantity | 01 Piece |
Model Name/Number | SH-TP160 |
Brand | Topwell |
Max Cutting Thickness | 70mm |
Automation Grade | Fully Automatic |
Usage/Application | CNC Plasma cutting |
Capacity | 70mm |
Gas Supply | Air |
Power Source | 160Amps |
Frequency | 50-60Hz |
Powerful Output
Heavy duty-160A@100%, at 40 104???), the quality cutting capacity is up to 45mm and CNC piercing 25mm;
High output voltage-200VDC ensures a long plasma arc length;
Specially designed torch
Refined single-air system Torch-requires higher pressure and arc voltage, which shift the cutting limitation;
Maximum productivity
Maximum productivity-Finish jobs faster with cut speeds two and three times greater than other traditional cutting process;
Superior cut performance-Significantly save a lot of time on secondary operations;
Long-life and reliability
TOPWELL''s long-life consumable-deliver operating cost that is less than half the competition;
TOPWELL certified reliability-ensures performance in the most demanding environment.
PowerCUT-160HD
Professional-grade plasma cutting system for CNC up to 20mm
For Mild Steel Cutting:
Dross Free(CNC)
Pierce*
Recommended
Severance(Hand Cutting)
Thickness:
20mm
25mm
45mm
70mm
Cut Speed:
900mm/min
500mm/min
125mm/min
*Pierce rating for handheld using or with CNC torch height control
Minimum Order Quantity | 1 Piece |
Model Name/Number | CUT 120 |
Brand | SHECO |
Max Cutting Thickness | 30mm |
Frequency | 50/60 Hz |
Voltage | AC 380V +/- 15% |
Approx Dimensions | 560 x 370 x 350mm |
Duty Cycle | 100% |
Weight | 39 kg |
Efficiency | 85% |
Input Current A | 23.1A |
No Load Voltage | 268V |
Output Current Range | 20-100A |
Rated Output Voltage | 120V |
No Load Loss | 80W |
Power Factor | 0.93 |
Insulation Grade | F |
Housing Protection Grade | IP21 |
Arcing Way | Transfer |
Recommended Air Pressure | 4.5 to 5.5 |
We are offering CUT 100 IGBT Inverter Plasma Cutting Machine to our clients.
Model Name/Number | Powermax 30 |
Weight | 2.1 lbs |
Brand | Hypertherm |
Cutting Capacity | Max 12mm |
Input Voltage | 120V |
Phase | Single Phase |
Open Circuit Voltage | 240V DC |
Rated Output Current | 15 to 30 A |
Rated Output Voltage | 83V DC |
Operating Temperature | -10 to 40 deg C |
Storage Temperature | -25 to 55 deg C |
Power Factor | 0.99 at 120V |
Input Current | 26 A |
Minimum Gas Inlet Flow Rate | 3.5 scfm at 65 psi |
Recommended Gas Inlet Flow Rate | 4.0 scfm at 80 psi |
Gas | Clean, dry, oil-free air and 99.995% pure Nitrogen |
Model Name/Number | Smart Focus 400 |
Brand | Kjellberg |
Approx Dimensions | 1,030 x 680 x 1,450 mm |
Duty Cycle | 100% |
Weight | 563 kg |
Maximum Cutting Range | 100 mm |
Recommended Cutting Range For Mild Steel | 60 mm |
Recommended Cutting Range For Stainless Steel | 70 mm |
Piercing | 50 mm |
Plasma Torch | PerCut 4000 |
Mains Voltage | 3 x 400 V, 50 Hz |
Slow Fuse | 180 A |
Connected Load | 116 kVA |
Cutting Current | 35 - 400 A |
Marking Current | 10 - 50 A |
Plasma Gas | O2 , Ar/H2 , N2 , Air |
Swirl Gas | O2 , N2 , F5, Air |
Marking Gas | Ar, N2 |
Model Name/Number | CutFire 100i |
Brand | Kjellberg |
Max Pressure Bar | 5.5 Bar |
Cutting Current | 100 A |
Cutting Range | Max 20mm |
Plasma Gas | Air |
Swirl Gas | Air |
Torch Cooling | Air cooled |
Torch Shaft Diameter | 36 mm |
Brand | SHECO |
Voltage | 220V AC |
Phase | Single Phase |
Input Power | 600W |
Transmission | Rack & Pinion drive system |
Track Length | 2000mm |
Moving axis | Choosing axis | Rang of activities |
X Axis | Spindle Box moving axis direction | Maximum stroke (customer cut pipe length ) |
Y axis | Workpiece rotation axis direction | 360o free rotation |
Z axis | Cutting Torch moving in up and down | Max stroke is half of largest diameter adding 20mm |
U axis | Cutting Torch moving in forth and back | Round pipe : 50 - 200mm Square pipe : 60 - 200mm |